Humberstone Lock Services · Port Colborne
What drives the work we do
Locks, keys and doors, done properly.
From the shop
Humberstone Lock Services
This company started with one van, a bench full of cylinders and a habit that has never left: explaining the job before touching the door. The founder learned the trade the slow way, fitting deadbolts in draughty side entrances and pulling snapped keys out of car doors in the cold. Those early years taught a simple lesson. People care less about the mechanism and more about knowing what is happening to their home. So we still talk first. We ask what worries you, look at the hardware, and describe what we would do and why. Then you decide. The tools are better now and the team is bigger, but that first conversation still sets the tone for every visit.
— Humberstone Lock Services
- You know what is happeningFrom the first look to the last turn of the key, we narrate the job in plain terms. You should never wonder what we are doing to your door.
- Suggestions, not pressureIf we think an upgrade would help, we say so once and explain why. If you decline, that is the end of it.
- The old parts handledRemoved locks and keys are given to you or taken away as you prefer. Old keys that no longer work are worth destroying, and we will do that if you like.
Hours
- HoursOpen 24/7
- Nights and weekendsSame fees
- In business14 years
- VisitsOn-site assessment
Open 24/7
How a visit goes
High security locks are cylinders and deadbolts designed to defeat the methods used against ordinary doors. Inside the cylinder a second locking mechanism, usually a sidebar released by finger pins or rotating pins, has to be satisfied at the same time as the normal pin stack, which is what stops…
1 of 3
Walking the door with you
We look at the cylinder, the bolt, the strike, the hinges and any glass nearby, and say plainly which parts are sound and which are thin.
2 of 3
Choosing the level together
A graded deadbolt with a patented cylinder for most homes, rated cylinders and heavier lock bodies for businesses. You pick the doors and the depth.
3 of 3
Fitting, keying and registering
Cylinders go in, strikes are screwed into the framing, keys are cut from code, and the system is registered so only you can order more.
Niagara, Ontario
Port Colborne information
- Town
- Port Colborne, Niagara, Ontario
- In business
- 14 years
- Hours
- Open 24/7, same fees any hour
- Phone
- (365) 364-0729
- Visits
- On-site assessment preferred
Nearby
2021 census · what it means at the door
80%Older homes
About 80% of homes in Port Colborne were built in 1980 or earlier, according to the 2021 Census.
Old brass keys wear thin, and a key that has bent for years finally lets go in a cold cylinder. In older housing stock this is a regular call, so the locksmith is ready to extract the piece, check the cylinder and cut a new key from the code.
71%Mostly houses
Single-detached houses make up about 71% of homes in Port Colborne (2021 Census).
Where homes are mostly detached, patio and sliding doors deserve attention alongside the hinged ones. Auxiliary locks, pin locks and better latches for sliders are routine additions that a locksmith brings on the same visit as the front door work.
On-site assessment preferred
Request a visit
Call about rekeying your new home. Send a photo of the lock.